| Certification / CTR | $10.00 Each |
| PPP (Pre-Production Process) / LOP (Letter of Procedure) $95.00 Each | $95.00 Each (Subject to Process & Complexity) |
| PPAP (Subject to Process & Complexity) | |
| Stress Relief | |
| General Stress Relief Bake (Subject To Actual Temp) $40 / hour, $40 M/C | $40 / hour, $40 M/C |
| Common Specs: MIL-DTL-16232 HRc = 39, TT-C-490 HRc = 40 | |
| 1 hour/inch thick @ 350-400F, 1/2 hr min $40 / hour, $40 M/C | $40 / hour, $40 M/C |
| Option for carburized parts is 8 hours @ 225-275F $240 LOT Blasting | $240 LOT |
Certain specs, like MIL-DTL-16232, require blasting. Depending on customer/contract/spec/etc blasting may or may not be required or desired, and may be performed by Aactron or by customer Please advise on your RFQ’s, PO’s and/or shipping documents
| Hydrogen Embrittlement Relief | |
| General Relief Bake (Subject To Actual Temp) | $30 / hour, $30 Min Charge |
| NON-Bake Ambient-Temp Aging Options | N/C |
| NON-Bake Ambient-Temp Aging Options | |
| 8-Hour Bake | $240 LOT |
| 5-Day Aging | N/C |
| NOTE: Customers may waive this requirement in writing. | |
| Testing: | |
| SS Dry Phos (1-2 Hours) | $80.00 Each |
| SS Oil or Phos & Oil (24-72 Hours) | $100.00 Each |
| SS Phos & Solid Film Lube (100 Hours) | $115.00 Each |
| SS 168 Hours | $125.00 Each |
| SS 240 Hours | $230.00 Each |
| SS Phos & CARC (336 Hours) | $235.00 Each |
| SS 480 Hours | $290.00 Each |
| SS 600 Hours | $380.00 Each |
| SS 720 Hours | $445.00 Each |
| SS 840 Hours | $515.00 Each |
| SS 960 Hours | $580.00 Each |
| SS 1000 Hours | $600.00 Each |
| SS All Other Requirements | (Subject to hours required) |
| Passivation Verification for Stainless Steels (Copper Sulphate) | N/C |
| Embrittlement Relief Verification (MIL-DTL-16232, TT-C-490) | N/C |
| Coating Weight | N/C |
| Coating Thickness | N/C |
| Coating Adhesion | N/C |
NOTE: Testing prices may vary depending on actual quantity, part size, weight, configuration, masking areas, etc. Test Panels and Sample Parts Processing Cost to pretreat & process samples & panels will vary based on quantity, process, etc.
Please indicate which you will need and in what quanitities.
Rev: 20110512
